2024 New Shoes for the Versys

​On the right a Shinko 705 with 10k on it. On the left, a Shinko 705 that has only rolled across my garage floor. The Versys has new shoes. 😀

The Versys gets new shoes!

I can run faster and jump higher with these on! 

We decided to purchase the Princess Auto motorcycle tire bead breaker, and the on sale, Dynamic tire balancer based on a review by a friend, so there was a flurry of seasonal tire changes completed in the garage this July. 

Truth be told, I decided it was well past the time to replace my front tire on the Versys, and I opted to do it myself, so broke the bead with a series of wood clamps but it was a right PITA (pain in the arse) and when done, I tried to install balance beads and that too was an unholy mess until I learned the technique that worked to get the two ounces into the tire, but that valve stem was a terrible! It wouldn't take any air until I put the older valve core back in. I had bought a valve core removing tool, a few of them, but was I ever glad I did, as I had to cut mine in half to fit it under the paired brake disks, and it worked like a charm over sixteen times to seat and unseat that core! **Sigh.

I still had my rear tire on order and two more tires and tubes for Caroline's KLR, and when the tires arrived, we convinced ourselves that buying the Motorcycle Tire Changer with bead breaker for $89.99 Canadian was worth it. We ran into a mate Jayson from the Red Isle Riders, and I mentioned that the Motorcycle Wheel Balancing Stand was on sale this week, and he said he owned one, and it "Did alright." Good enough for me! We went in, and left Princess Auto lighter in the wallet than when we went in, but well armed with the motorcycle bead breaker and the tire balancer. 

Motorcycle Tire Changer with Bead Breaker

Motorcycle Wheel Balancing Stand

Assembling them was straight forward, and I used Caroline's 1/4" Ridgid impact driver along with blue loctite thread locker to assemble most of the two items. I could see that storing the bead breaker on a wall spike high in the garage was going to be perfectly acceptable when not in use, but I'd have to find a special home for the Wheel Balancer up and out of the way off of the shop floor. As the garage is also damp, I oiled everything that moved, and used anti seize paste on things that didn't like the hex lock nuts. 

2021 - My Versys has a flat tire again! Shinko 705

 I bet you are wondering how I found myself here, sitting on the side of the road with a flat rear tire on my '09 Kawasaki Versys 650? 

It's a little bit funny, it's a little bit sad, let me tell you all about the ride we had. 

Facebook marketplace is a great way to find used gear at affordable prices, and I'd seen someone advertise some Alpinestars SMX 4 boots for sale that I knew from past experience would fit me like a glove (one I got them wet while riding lol), and for less than 1/2 the cost of retail! 

Trouble was they were located a bit out of town and I missed them the first time I tried for a pickup, then they moved to a new house in Burlington Prince Edward Island, so it took a good weekend with some lovely warm July weather before I invited Caroline to come ride with me on her still new to her 2006 KLR and get some use out of it. 

Are you kidding me?! A piece of glass!?

She agreed, and I met up with her at her place in Tryon, waited until she'd geared up and we had our Cardo Scala G4s paired up and ready to go, then I let her lead the way as there were some back roads she knew of that were sure to have more fun factor then allowing Google to take us straight there, but we also dropped in to see my sister Wendy-Sue and her husband Kirk. 

Stick around and have a drink, Ron. 
H2O or H2O? 

The garden was looking lovely, and so it should after all the effort they make to keep it looking good. 

I'd been messaging Tara and she'd put the boots out at the end of their long drive in a plastic bag, so it was time to say so long to Kirk and Wendy and head up to Burlington and collect them, as I'd already paid for them via interac e-transfer, and as there was COVID in the air, this was contact-less pickup. 

Right. So after a fun little ride, we end up on a well known to us corner on highway 6, but we would need to make the corner off of 6 onto Route 104 that heads up to Burlington via Irishtown road. But Caroline, leading on the knobby tired KLR opted to obey the rules of the road and made a horribly tight left turn and onto route 104. Can you see what I was going to do? Yep, ride straight across the grassy verge and shave seconds of time and possibly beat her through the intersection where she was going to have to stop. 

Hahahaha! Oh what fun to see the surprise on her face... Well, I'd have to imagine it as she had a helmet on, right? Darn it! I got across the verge, but lost out on the race to the intersection as I had to yield to a slower moving truck and Caroline beat me onto the 104. **Sigh. 

Well, it was only a few minutes further before we'd stopped at the end of the farm lane and picked up the plastic bag with the boots in it. I strapped them down with my rock straps onto the pillion seat, but as I was tugging the straps tighter, I wasn't happy with the way the bike was leaning on the kickstand, and when making those last corners, I had to fight the turn in a bit too hard I thought, and now I tied it all together, and with a muffled curse (ladies present), I hauled off and kicked the center of the tire only to confirm my suspicions... Dead flat. Thankfully the Shinko 705 has a quite stiff carcass in the 170 width on what should have been the 160 rear and you can ride on it when totally flat. Don't ask me how I know. I've been down this road before you see...

I rolled the bike forward while Caroline looked on, and there it was, a lovely shiner that looked a bit like a streak of chalk on the tire, but it was what was left of a sliver of glass that must have sat in the grass of that verge that I'd been so pleased to have cut across not so long ago. 

<INSERT CURSE WORDS HERE>  Oh darn it. The tires had barely even been worn in this season! I'd had the Kawasaki dealer Bolgers Motorsports install them in mid March, and I think I'd only put about 700 kilometers on them! I have a new theory that Shinko 705s are susceptible to damage as they are a soft tire compound. Change my mind. 

I had to remove the boots to get my seat off the bike as my tool kit was under the seat, and I surprised Caroline when I pulled out a tire patch kit, and a pair of CO2 cartridges and settled down to work on the tire, handing her my phone and asking her to take some pictures. I think when it happens again next season, I'll get her to take some video of it. :D

A small set of locking needle nose Vice Grips. I'd used these in 2019 to bodge a clutch cable and rode over 1000 km from Maine to Ontario with it working as a clutch cable lever. Hahaha! 2019 Ontario, Yours to Discover. Now they came in handy extracting that little devil! 

I've gotten good at this with practice, and once I had the glass out, went straight for the rasp and made the hole a bit more symmetrical so the sticky string plugs I was going to use would hold better.

Reaming the hole

I'd picked up a small Slime brand tire plugging kit that was really for ATVs and lawn tractors, but it should be perfect for motorcycles as the handles were straight and small, and the string appeared long enough to make that lovely double loop we all love and enjoy. 

Super basic, super cheap

Now for the important bit, flowing some rubber glue onto the sticky string so it would have a healthy coat inside the tire and out. I'd even put some on the reamer and done a pass or two in the hole just to say that I'd coated both the hole and the string. 

hitting that string with beaucoup de goop

Whoops, too far into the tire!

Whoops! There wasn't as much spare on the exterior of the tire as I wanted to see, so I used the vice grips to reach in and pull the plug back out toward me. Success! I'd left exposed a bit more than 1/4 inch and there was enough rubber glue for my liking. 

Extreme Zoom!

Schrader valve 

This setup is brilliant. It will air up the tire to 'rideable" with only two cartridges, but then you need to exercise some caution until you get it aired up to full pressure. 

Use a glove or a rag. That is COLD!

The repair is done, lets see if we can get this home. 

And I survived the day. I limped it to a gas station with air slow starts and stops, careful cornering, aired it up to standard pressure, 36 PSI preferred, and blasted back home with my girlfriend. 

I got another two or three thousand kilometers off of that tire before I replaced it as worn out. 

Cheers!

2020 The Shinko 705 gets it in the heart!

It looks as if I may not get 10,000 kilometres out of my Shinko 705 rear tire after all. Caroline and I were out Thursday afternoon for a ride around Canoe Cove before the weather closed in on us, and I felt the bike hit something on the newly paved asphalt surface, then a few bouts of clicking. I thought perhaps that I'd picked up a stone as the noise went away in seconds, but on Saturday morning when we were supposed to start our ride, my rear tire was flat, but the carcass is so stiff that you don't even notice a problem until you try to turn the bike, so I never made it out of the parking garage, and Caroline was kind enough to show up with her patch kit that we'd used so effectively last year when I picked up a screw in the tire.

This is the biggest BOLT I've ever seen pierce one of my tires.

That thing is HUGE!!!

Caroline packs a plug kit in her car as she had a leak last spring that we were able to plug to keep that one tire going a bit longer. 

I've also read that radial steel belts are not kind to the mushroom style of plug, so I prefer this older, proven technology for the time being and it is widely available at Crappy Tire, Wallymart, and Home Despot, for under $10, but your mileage may vary. 

I really didn't want to ride on this as the plug didn't feel great, and I'd used a ton of glue, so I opted to leave it over night and headed in the cage over to help Caroline install a GS-100A Brake Light Flasher that she'd purchased on Amazon.ca as she was envious of the 3rd Brake Flasher that I'd installed on my Versys.

Mission accomplished, but now that that plug had been given a chance to cure, I managed to get almost another 7,000 km out of that rear tire before replacing the front and rear as a set a couple of weeks later mid July. 

I think it may be put down to how soft the rubber is on the Shinko. I have no cold weather problems, seemingly only related to hot weather days or high speed heat cycles of this tire set. 

UPDATE: Spring 2021

I replaced the tires at 100,314 km so that rear tire had 7,500 km on it when it was retired, and I estimate I put about 800 kilometres on the rear before replacing the front and rear as a set. I opted for the Shinko Raven 009 Sport Touring tires as the 705s were all on back order at the time. I'm not a huge fan of the Ravens as I had some front tire scalloping that saw the front swapped out at the same time as the rear, and back on went a fresh set of the 705s!